Understand Scenarios in IFs - Revision history

Ethan.Sullivan at 16:50, 26 March 2026

2026-03-26T16:50:44Z

← Older revision		Revision as of 16:50, 26 March 2026
Line 11:		Line 11:

	==== Scenario Files and Run Files ====		==== Scenario Files and Run Files ====
	Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''S''cenario Files (.sce) and Run Files (.run). The Scenario Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario Files will be saved with .sce as the file extension. The Run Files are files that hold forecast results after the IFs software has run. Run Files will be saved with .run as the file extension. The running of a Scenario Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run File. The most recent Run File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.		Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''S''cenario Files (.sce) and Run Files (.run). The Scenario Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario Files will be saved with .sce as the file extension. Once saved scenario files are located in a folder within \IFs\Scenario\..The Run Files are files that hold forecast results after the IFs software has run. Run Files will be saved with .run as the file extension. The running of a Scenario Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run File. Once saved run files are located in a folder within \IFs\RUNFILES\. The most recent Run File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.

	In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.		In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.

Ethan.Sullivan at 01:07, 14 February 2026

2026-02-14T01:07:23Z

← Older revision		Revision as of 01:07, 14 February 2026
Line 10:		Line 10:
	Change initial conditions and parameters using the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create scenarios beyond the base case. Adjust parameters to make specific intended interventions, for example use the Government Spending by Destination and Sector multiplier parameter gdsm to increase government spending in education. A detailed guide of the different parameters and their potential uses can be found in the [[Guide to Scenario Analysis in International Futures (IFs)\|Guide to Scenario Analysis]].		Change initial conditions and parameters using the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create scenarios beyond the base case. Adjust parameters to make specific intended interventions, for example use the Government Spending by Destination and Sector multiplier parameter gdsm to increase government spending in education. A detailed guide of the different parameters and their potential uses can be found in the [[Guide to Scenario Analysis in International Futures (IFs)\|Guide to Scenario Analysis]].

	==== Files and Run Files ====		==== Scenario Files and Run Files ====
	Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''S''cenario Files (.sce) and Run Files (.run). The Scenario Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario Files will be saved with .sce as the file extension. The Run Files are files that hold forecast results after the IFs software has run. Run Files will be saved with .run as the file extension. The running of a Scenario Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run File. The most recent Run File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.		Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''S''cenario Files (.sce) and Run Files (.run). The Scenario Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario Files will be saved with .sce as the file extension. The Run Files are files that hold forecast results after the IFs software has run. Run Files will be saved with .run as the file extension. The running of a Scenario Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run File. The most recent Run File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.

Ethan.Sullivan at 01:06, 14 February 2026

2026-02-14T01:06:41Z

← Older revision		Revision as of 01:06, 14 February 2026
Line 10:		Line 10:
	Change initial conditions and parameters using the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create scenarios beyond the base case. Adjust parameters to make specific intended interventions, for example use the Government Spending by Destination and Sector multiplier parameter gdsm to increase government spending in education. A detailed guide of the different parameters and their potential uses can be found in the [[Guide to Scenario Analysis in International Futures (IFs)\|Guide to Scenario Analysis]].		Change initial conditions and parameters using the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create scenarios beyond the base case. Adjust parameters to make specific intended interventions, for example use the Government Spending by Destination and Sector multiplier parameter gdsm to increase government spending in education. A detailed guide of the different parameters and their potential uses can be found in the [[Guide to Scenario Analysis in International Futures (IFs)\|Guide to Scenario Analysis]].

	==== ~~Scenario-~~Files and Run-Files ====		==== Files and Run Files ====
	Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''~~Scenario-~~Files (.sce)'' and ''Run-Files (.run)''. The Scenario-Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario-Files will be saved with .sce as the file extension. The Run-Files are files that hold forecast results after the IFs software has run. Run-Files will be saved with .run as the file extension. The running of a Scenario-Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run-File. The most recent Run-File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.		Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''S''cenario Files (.sce) and Run Files (.run). The Scenario Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario Files will be saved with .sce as the file extension. The Run Files are files that hold forecast results after the IFs software has run. Run Files will be saved with .run as the file extension. The running of a Scenario Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run File. The most recent Run File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.

	In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.		In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.

Ethan.Sullivan at 18:22, 6 February 2026

2026-02-06T18:22:17Z

Ethan.Sullivan: Updated parameter types and wording in many places

2026-02-06T01:25:37Z

Updated parameter types and wording in many places

Show changes

Ethan.Sullivan: Updated image and language. Added more detailed examples of parameter types.

2025-08-05T11:56:00Z

Updated image and language. Added more detailed examples of parameter types.

Ethan.Sullivan: Created page with " = Introduction to Scenarios = A scenario is a story or story outline. Thinking about the future normally involves creating alternative scenarios, or stories, about the possible evolution of drivers. Some such scenarios are exploratory and consider the possible unfolding of different futures around key uncertainties, such as the rate of some aspect of technological advance or the fragility of some element in the global environment. Other scenarios are normative and devel..."

2025-08-05T10:41:49Z

Created page with " = Introduction to Scenarios = A scenario is a story or story outline. Thinking about the future normally involves creating alternative scenarios, or stories, about the possible evolution of drivers. Some such scenarios are exploratory and consider the possible unfolding of different futures around key uncertainties, such as the rate of some aspect of technological advance or the fragility of some element in the global environment. Other scenarios are normative and devel..."

New page

= Introduction to Scenarios =
A scenario is a story or story outline. Thinking about the future normally involves creating alternative scenarios, or stories, about the possible evolution of drivers. Some such scenarios are exploratory and consider the possible unfolding of different futures around key uncertainties, such as the rate of some aspect of technological advance or the fragility of some element in the global environment. Other scenarios are normative and develop stories about preferred futures, such as a global transformation to sustainability.

Scenarios in a computer model typically are built from multiple interventions that collectively help build a coherent story about the future. Often, but somewhat imprecisely, the word scenario is used more loosely to refer to any intervention (such as the change of a fertility rate for a country or an alternative assumption about oil resources).

Scenarios or interventions with respect to what? When IFs or other computer simulations are "run", without making any changes to parameters or initial conditions specified as the default values, they generate a forecast that is typically called the base case (sometimes reference run). The IFs base case, always available when a model session is initiated, is itself a scenario. Sometimes the base case is incorrectly referred to as a trend extrapolation or a "business as usual" scenario. More accurately, however, the base case of IFs is a computation that involves the full dynamics of the model and therefore has very nonlinear behavior, often quite different from trends. It is a good starting point for scenario analysis for two reasons. First, it is built from initial conditions of all variables and on that has been given reasonable values from data or other analysis. These initial conditions and parameters make up the package of interventions that constitute the base case scenario. Second, the base case is periodically analyzed relative to the forecasts of many other projects across the range of issue areas covered by IFs and is to a degree "tuned" to reproduce the behavior of respected forecasters.

Change initial conditions and parameters using the [[Quick Scenario Analysis with Tree|Quick Scenario Tree]] to create scenarios beyond the base case. Adjust parameters to make specific intended interventions, for example use the Government Spending by Destination and Sector multiplier parameter gdsm to increase government spending in education. A detailed guide of the different parameters and their potential uses can be found in the [[Guide to Scenario Analysis in International Futures (IFs)|Guide to Scenario Analysis]].

Use the [[Quick Scenario Analysis with Tree|Quick Scenario Tree]] to create and save two different kinds of files: Scenario-Load-Files (.sce) and Run-Result-Files (.run). The Scenario-Load-Files files represent changes that were made to the scenario tree but that were not yet entirely run through IFs software. The Run-Result-Files represent files that were originally changes to the scenario tree that were eventually entirely run through IFs software. The running of a Scenario-Load-Files file will make those changes permanent and therefore produce a Run-Result-File.

In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.

= Parameter Types =
Parameters are numbers that determine relationships among variables in the equations of IFs. Parameters are often set to a single value across time and they therefore do not always "vary" as do "real" variables. Many parameters are "policy handles," the value of which is set in order to determine the behavior of the model. In IFs parameters are written in lower case form such as endemm and variables are written in upper case such as ENDEM. There are several types of parameters that include:

'''Multipliers.''' They have a normal value of 1, and to increase whatever they multiply (say agricultural yield with ylm agricultural yield multiplier) by 50 percent increase the parameter to 1.5. To decrease it by 25 percent decrease the multiplier parameter to 0.75. Such changes are almost always spread out over time, keeping the multiplier's value at 1 in the base year and gradually increasing or decreasing it over a period of years. Never (or only under certain circumstances) change a multiplier in the initial year. The model is set up to provide accurate results for the first year and will compensate for and thereby offset changes. For instance, a multiplier on food production set equal to 1.5 for the first year and all years thereafter, may lead to results that are no different than in the base case. Instead gradually introduce your change, preserving the multiplier value of "1" in the initial year. Examples of multipliers include: enpm (energy production multiplier), or tfrm (total fertility rate multiplier). Note that multipliers typically end with the letter "m".

'''Additive Factors.''' Most have a normal value of 0, thereby leaving what is added (ex. exports) unchanged. The parameter number to achieve a 50 percent increase might depend on the amount that the target variable started at. Most additive parameters are, however, applied multiplicatively to the quantity they modify (that is, 1 plus the additive parameter is multiplied times the quantity), thereby scaling the parameter. In that case, the base or normal value of the parameter will be zero, but a 50 percent increase in the quantity modified can be achieved with a parameter value of 0.5 and a 50 percent decrease with -0.5. Never (or rarely) change the base year value of additive parameters because it will either incorrectly change model results in the base year or, more likely, will result in model compensation to protect initial model results. An example of an additive parameter is: xshift (export shift as a result of the promotion of exports). Although earlier versions of IFs used additive factors and multipliers with comparable frequency, most additive factors have been replaced by multipliers to standardize most parameter change.

'''Exponents.''' For instance, many "elasticities" raise a variable to a power. For these parameters the "normal value" will vary greatly, but they will most often fall between -2 and 2, with many clustering around 0. In most cases it will make sense to change these parameters for all years including the first - generally the model will not use them in the first year and they will affect results only in subsequent years. Examples include: elass (elasticity of energy supply to profit), and engel (Engel's coefficient on personal consumption).

'''Growth Rates.''' It is possible to force some processes to grow at specified rates. More commonly, the specified rates serve as targets and the dynamics of the model often shift actual growth rates somewhat, necessitating experimentation with targets to achieve a desired growth. Examples include: eprodr (energy production growth rate) and tgrld (target growth in cultivated land).

'''Transforming coefficients.''' Some coefficients transform units of variables, for example change a unit values from positive to negative for carfuel1 (carbon generated from burning oil) to simulate technology change in sequestration.

'''Variables.''' This category should technically not be called parameters at all. They could and would be computed endogenously, if the model included the appropriate theoretical structure. They generally do not determine the interaction of other variables, nonetheless some variables values can be set exogenously similar to parameters. Examples in IFs are: AQUACUL (agricultural fish production) and GOVDEBT (government debt as a percentage of GDP).

'''Initial conditions.''' Again, these are not strictly parameters, but rather first-year values for variables subsequently computed by the model. Although many initial conditions, like the population (POP) of the U.S., are sufficiently well-known that they should not be changed, others, like the ultimate availability of oil and gas resources are only reasonable guesses. Change some initial conditions based on new data or even simply to test the implications. This category includes a great many variables, such as: resor (ultimate resource of fossil fuels) and igdpr (initial GDP growth rate).

'''Switches.''' These parameters turn something on or off. They generally take on values of 1 (on) or 0 (off), but can have additional settings. For instance, some switches not only turn on some process, but set a key value within it (like the level of energy exports). Switches are most often on or off for the entire run, but it sometimes makes sense to "throw a switch" in the middle of a run. Switches fundamentally alter the structure of a model. Switch examples include: agon (agriculture economy linkage) and squeez (economic impact of energy shortage).

'''Reactivities.''' These are factors that relate growth in one process to growth in another. Although many will range between -2 and 2 (with 0 eliminating linkage of the processes), some have very large values. They are very much like elasticities, but the formulations that use them do not have exponential form. Examples include: cdmf (civilian damage factor in war; portion of the economy), reac (reaction of countries in military spending to a threat of another).

'''Allocating coefficients.''' Coefficients are often used in multiplicative relationships with other variables, but many such coefficients are not what were earlier called multipliers (with a base value of 1). Instead they can serve an allocating role. For instance, to allocate governmental spending to health, education, and the military. Allocating coefficients frequently have values between 0 and 1. Again, generally do not change these parameters in the initial year because the model will often compensate for changed values in the first year. Instead, change them by series over time. Examples of allocating coefficients in IFs include: aidlp (foreign loan portion of aid), and drcpow(depreciation rate of conventional power).

'''Relationship Parameters.''' These parameters alter or set relationships between two parameters or variables. These parameters may also be captured in another grouping described above, for example elasminc (elasticity of imports to income level).

The focus here is on exogenous parameters only - on those elements of the model that you can change. Many computed variables are used in the computation of other variables in the same way that parameters are, as multipliers, additive factors, coefficients, and so on. You can display those, but unlike true parameters, you cannot change them.

= Understanding Model Computations =
It is critical that there be as much transparency as possible with respect to computations that underlie the variables chosen for display. In a large, integrated model, achieving such transparency is not simple. Look at the pages under the extensive Help section called [[Understand the Model|"’Understand IFs"]] for extensive documentation via flow charts, equations, and computer code.

While working with display of variables, however, there are several ways in which to drill down for explanations of what lies behind their computations. After a variable or parameter is added to the Quick Scenario with Tree, learn more about how a parameter or variable is generated by clicking on it and exploring the options.

← Older revision		Revision as of 18:22, 6 February 2026
Line 3:		Line 3:
	A scenario is a story or story outline. Thinking about the future normally involves creating alternative scenarios, or stories, about the possible evolution of drivers. Some such scenarios are exploratory and consider the possible unfolding of different futures around key uncertainties, such as the rate of some aspect of technological advance or the fragility of some element in the global environment. Other scenarios are normative and develop stories about preferred futures, such as a global transformation to sustainability.		A scenario is a story or story outline. Thinking about the future normally involves creating alternative scenarios, or stories, about the possible evolution of drivers. Some such scenarios are exploratory and consider the possible unfolding of different futures around key uncertainties, such as the rate of some aspect of technological advance or the fragility of some element in the global environment. Other scenarios are normative and develop stories about preferred futures, such as a global transformation to sustainability.

	Scenarios in a large integrated model typically are built from multiple interventions that collectively help build a coherent story about the future. Often, but somewhat imprecisely, the word scenario is used more loosely to refer to any intervention (such as the change of a fertility rate for a country or an alternative assumption about oil resources).		Scenarios in a large integrated model typically are built from multiple interventions that collectively help build a coherent story about the future. Often, but somewhat imprecisely, the word ''scenario'' is used more loosely to refer to any intervention (such as the change of a fertility rate for a country or an alternative assumption about oil resources).

	Scenarios or interventions with respect to what? When IFs or other computer simulations are "run", without making any changes to parameters or initial conditions specified as the default values, they generate a forecast that is typically called the base case (sometimes reference run). The IFs base case, always available when a model session is initiated, is itself a scenario. Sometimes the base case is incorrectly referred to as a trend extrapolation or a "business as usual" scenario. More accurately, however, the base case of IFs is a computation that involves the full dynamics of the model and therefore has very nonlinear behavior, often quite different from trends. It is a good starting point for scenario analysis for two reasons. First, it is built from initial conditions of all variables that have been given reasonable values from data or other analysis. These initial conditions and parameters make up the package of interventions that constitute the base case scenario. Second, the base case is periodically analyzed relative to the forecasts of many other projects across the range of issue areas covered by IFs and sometimes "tuned" to reproduce the behavior of respected forecasters.		Scenarios or interventions with respect to what? When IFs or other computer simulations are "run", without making any changes to parameters or initial conditions specified as the default values, they generate a forecast that is typically called the base case (sometimes reference run). The IFs base case, always available when a model session is initiated, is itself a scenario. Sometimes the base case is incorrectly referred to as a trend extrapolation or a "business as usual" scenario. More accurately, however, the base case of IFs is a computation that involves the full dynamics of the model and therefore has very nonlinear behavior, often quite different from trends. It is a good starting point for scenario analysis for two reasons. First, it is built from initial conditions of all variables that have been given reasonable values from data or other analysis. These initial conditions and parameters make up the package of interventions that constitute the base case scenario. Second, the base case is periodically analyzed relative to the forecasts of many other projects across the range of issue areas covered by IFs and sometimes "tuned" to reproduce the behavior of respected forecasters.
Line 11:		Line 11:

	==== Scenario-Files and Run-Files ====		==== Scenario-Files and Run-Files ====
	Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''Scenario-Files (.sce)'' and ''Run-Files (.run)''. The Scenario-Files represent changes that were made to parameters in IFs but that have not yet run through IFs ~~software~~. Scenario-Files will be saved with .sce as the file extension. The Run-Files are files that hold forecast results after the IFs software has run. Run-Files will be saved with .run as the file extension. The running of a Scenario-Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run-File. The most recent Run-File produced by running the model is called the Working-File. By default the Working-File is the base case until the model is run.		Use the [[Quick Scenario Analysis with Tree\|Quick Scenario Tree]] to create and save two different kinds of files: ''Scenario-Files (.sce)'' and ''Run-Files (.run)''. The Scenario-Files represent changes that were made to parameters in IFs but that have not yet run through IFs. Scenario-Files will be saved with .sce as the file extension. The Run-Files are files that hold forecast results after the IFs software has run. Run-Files will be saved with .run as the file extension. The running of a Scenario-Files through the IFs software, will include those parameter changes in the scenario file while the model runs and will produce a Run-File. The most recent Run-File produced by running the model is called the ''Working-File''. By default the Working-File is the base case until the model is run.

	In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.		In addition to the base case, some versions of IFs will include a number of other previously-run scenarios, perhaps the set of scenarios for the National Intelligence Council’s (NIC) 2020 Project or those for the five Shared Socioeconomic Pathways. In the '''Scenarios''' drop down in Flex Displays, a list of previously-run scenarios is shown before any new scenarios are run. Because those have already been run, based on a set of interventions constituting their foundations, their results can already be displayed.

	= Parameter Types =		= Parameter Types =
	Parameters are numbers that determine relationships among variables in the equations of IFs. Parameters are often set to a single value across time and they therefore do not always "vary" as do "real" variables. Many parameters are "policy handles," the value of which is set in order to determine the behavior of the model. In IFs parameters are written in lower case form such as endemm and variables are written in upper case such as ENDEM. There are several types of parameters that include:		Parameters are numbers that determine relationships among variables in the equations of IFs. Parameters are often set to a single value across time and they therefore do not always "vary" as do "real" variables. Many parameters are "policy handles," the value of which are set in order to determine the behavior of the model. In IFs parameters are written in lower case form such as endemm and variables are written in upper case such as ENDEM. There are several types of parameters that include:

	'''Multiplier''': An equation result parameter that multiplies results (of variable calculations) by the value of the parameter. These parameters are 1 by default, thereby leaving what is multiplied unchanged. Examples of multipliers include: enpm (energy production multiplier), or tfrm (total fertility rate multiplier). Note that multipliers typically end with the letter "m".		'''Multiplier''': An equation result parameter that multiplies results (of variable calculations) by the value of the parameter. These parameters are 1 by default, thereby leaving what is multiplied unchanged. Examples of multipliers include: enpm (energy production multiplier), or tfrm (total fertility rate multiplier). Note that multipliers typically end with the letter "m".
Line 22:		Line 22:
	'''Additive Factor''': Also, an equation result parameter. Changes results by adding the value of the parameter to the results. These parameters are 0 by default, thereby leaving what is added unchanged. Some examples are: mfpadd (an additive factor on multi-factor productivity growth rate), or migrateinadd (migration rate inward additive factor). Additive Factors typically end with “add”.		'''Additive Factor''': Also, an equation result parameter. Changes results by adding the value of the parameter to the results. These parameters are 0 by default, thereby leaving what is added unchanged. Some examples are: mfpadd (an additive factor on multi-factor productivity growth rate), or migrateinadd (migration rate inward additive factor). Additive Factors typically end with “add”.

	'''Switch''': Turn off or on model elements, so alter the structure of the model. They generally take on values of 1 (on) or 0 (off). Switches are most often on or off for the entire run, but it sometimes makes sense to "throw a switch" in the middle of a run. Switch examples include: agon (agriculture economy linkage) and squeez (economic impact of energy shortage). Switch parameters ~~typically~~ end ~~with “sw”~~.		'''Switch''': Turn off or on model elements, therefore they alter the structure of the model. They generally take on values of 1 (on) or 0 (off). Switches are most often on or off for the entire run, but it sometimes makes sense to "throw a switch" in the middle of a run. Switch examples include: agon (agriculture economy linkage) and squeez (economic impact of energy shortage). Switch parameters may end in "sw" but have no specific naming structure.

	'''Initial Condition''': These are not strictly parameters, but rather first-year values for variables that are subsequently computed by the model, or values for rates of change ~~that cannot be altered in other years~~. These cannot be changed in years beyond the base. These ~~will~~ include parameters like: carinit (carbon dioxide in atmosphere in base year, initial condition) or igdpr (initial gdp growth rate). There is no ~~apparent~~ naming structure to these parameters.		'''Initial Condition''': These are not strictly parameters, but rather first-year values for variables that are subsequently computed by the model, or values for rates of change. These cannot be changed in years beyond the base. These include parameters like: carinit (carbon dioxide in atmosphere in base year, initial condition) or igdpr (initial gdp growth rate). There is no specific naming structure to these parameters.

	'''Limit''': These parameters set a limit for a variable such as the maximum or minimum. Some examples include: watwastetreatcostupper (wastewater treatment unit maximum cost, limit) or ylmax (maximum possible agricultural yield, limit). There is no ~~apparent~~ naming structure to these parameters but many end in “max” or “min”.		'''Limit''': These parameters set a limit for a variable such as the maximum or minimum. Some examples include: watwastetreatcostupper (wastewater treatment unit maximum cost, limit) or ylmax (maximum possible agricultural yield, limit). There is no specific naming structure to these parameters but many end in “max” “min” "upper" and "lower".

	'''Rate''': Change rates directly or to alter rates of growth or decline. Some examples of rate parameters are: femshrgr (annual growth of female share of the labor force, rate) or ginidomr (domestic gini index growth rate). There is no ~~apparent~~ naming structure to these parameters.		'''Rate''': Change rates directly or to alter rates of growth or decline. Some examples of rate parameters are: femshrgr (annual growth of female share of the labor force, rate) or ginidomr (domestic gini index growth rate). There is no specific naming structure to these parameters.

	'''Relationships''': Set or alter the relationship between two variables, by setting or altering the response level of one variable based on changes in another. Examples include: fpricr1 (food prices response to stock level, relationship) or elasde (energy demand to change in price, relationship)		'''Relationships''': Set or alter the relationship between two variables, by setting or altering the response level of one variable based on changes in another. Examples include: fpricr1 (food prices response to stock level, relationship) or elasde (energy demand to change in price, relationship)

	'''Target''': These are parameters that set a target ~~values~~ and the number of years to achieve certain targets or convergence between countries or variables. Target parameters typically come in pairs with the first parameter setting the target for a variable and the second setting the number of years to achieve that target. For example: sanithhbasictrgtval (percent of people with at least basic sanitation service, Target) and sanithhbasictrgtyr (percent of people with at least basic sanitation service, year to achieve, target). Many times, these parameters end in “val” and “yr” corresponding with setting the target value and year respectively. Another common ending for target parameters is “conv” for conversion targets.		'''Target''': These are parameters that set a target value and the number of years to achieve certain targets or convergence between countries or variables. Target parameters typically come in pairs with the first parameter setting the target for a variable and the second setting the number of years to achieve that target. For example: sanithhbasictrgtval (percent of people with at least basic sanitation service, Target) and sanithhbasictrgtyr (percent of people with at least basic sanitation service, year to achieve, target). Many times, these parameters end in “val” and “yr” corresponding with setting the target value and year respectively. Another common ending for target parameters is “conv” for conversion targets.

	'''Level''': Parameters that override the value of a variable ~~result from an internal calculation~~ like: enprix (energy price, level). There is no ~~apparent~~ naming structure to these parameters.		'''Level''': Parameters that override the value of a variable, like: enprix (energy price, level). There is no specific naming structure to these parameters.

	'''Function Coefficient''': Alter terms in internal calculations. These parameters will change the underlying structure of equations in the model and as a result will alter the values of variables. Examples of function coefficients include: labinformcoeffintercept (Intercept in the Calculation of Informal Labor Share, Function Coefficient) or govriskweight (Weights in the Calculation of the Government Risk Index, Function Coefficient)		'''Function Coefficient''': Alter terms in internal calculations. These parameters will change the underlying structure of equations in the model and as a result will alter the values of variables. Examples of function coefficients include: labinformcoeffintercept (Intercept in the Calculation of Informal Labor Share, Function Coefficient) or govriskweight (Weights in the Calculation of the Government Risk Index, Function Coefficient).

	The focus here is on exogenous parameters only - on those elements of the model that can be manually changed. Many computed variables are used in the computation of other variables in the same way that parameters are, as multipliers, additive factors, coefficients, and so on. These can be displayed too, but unlike true parameters, they cannot be changed.		The focus here is on exogenous parameters only - on those elements of the model that can be manually changed. Many computed variables are used in the computation of other variables in the same way that parameters are, as multipliers, additive factors, coefficients, and so on. These can be displayed too, but unlike true parameters, they cannot be changed.