Water preprocessor

Series pulled into water preprocessor

Table	Definition	Source	Notes	Last IFs Update
SeriesWaterFossilWithdrawal	Water withdrawal from fossil water aquifers	UNESCO Non-Renewable Groundwater Report 2006	SGH	2014/08/29
SeriesWaterResFossil	Water withdrawal from fossil water aquifers	UNESCO Non-Renewable Groundwater Report 2006; Aquastat country profiles	SGH	2014/08/29
SeriesWaterResGroundAfrica	Water withdrawal from fossil water aquifers for African countries	Quantitative maps of groundwater resources in Africa	SGH	2014/08/29
SeriesWasterwaterTreated	Wastewater: treated volume (10^9 m3/yr)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWastewaterProduced	Wastewater: produced volume (10^9 m3/yr)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWastewaterTreatedReused	Treated wastewater reused (10^9 m3/yr)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterDesalinated	Desalinated Water Produced	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterGroundWithD	Ground Water Withdrawal	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResExploitGround	Exploitable: regular renewable groundwater (10^9 m3/yr)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResExploitSurface	Exploitable: total renewable surface water (10^9 m3/yr)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResOverlap	Overlap between surface and groundwater	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResTotalExploit	Water resources: total exploitable	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResTotalRenew	Water resources: total renewable (actual)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResTotalRenewGround	Total renewable groundwater (actual) (10^9 m3/yr)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterResTotalRenewSurface	Total renewable suface water (actual)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterSurfaceWithD	Surface Water Withdrawal	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterTotalWithdSources	Total water withdrawal (summed by sources)	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterWithdAgriculture	Agricultural water withdrawal	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterWithdIndustrial	Industrial water withdrawal	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesWaterWithdMunicipal	Municipal water withdrawal	AQU  BATCH PULL	KK,JM	2016/05/21
SeriesLandIrActual%Equip	Area equipped for irrigation: actually irrigated, %	AQU  BATCH PULL	KK;JM	2016/06/06

Initializations 

Municipal water demand

Use SeriesWaterWithdMunicipal to initialize municipal water demand (WatWithdMun).

If null, then calculate urban population:

$UrbanPercent=POPURBAN_{c}/POP_{c}$

Then estimate municipal water demand using the equation: "MunDemandPC (Linear) versus GDP2011PCPPP(MOSTRECENT) (Log) AND Connections" which is in AnalFunc.

$Prediction=(x_{1}*ln(GDPPCP_{c}))+(x_{2}*ln(UrbanPercent))+(x_{3}*ln(WATSAFE_{c,3}))+b$

Multiply municipal water demand per capita by the size of the urban population.

$WatWithdMun_{c}=Prediction*POPURBAN_{r}$

Industrial water demand

Use SeriesWaterWithdIndustrial to initialize industrial water demand (WatWithdInd).

If null, then estimate using manufacturing value added. The equation is, "WaterWithdIndustrial(MOSTRECENT minus elec) (Linear) versus Man (Linear)" and is in TablFunc.

$Prediction=x_{c}*VADD_{c,manufacturing}$

Agricultural water demand

Initialize agriculture water demand using SeriesWatWithdAg.

If null, then set to 0.

Land irrigated

Initialize land irrigated (LANDIRAREAACTUAL) using SeriesLandIrActual%Equip.

If null, set to 90 (percent).

Multiply by land equipped for irrigation:

$LANDIRAREAACTUAL_{r}=LANDIRAREAACTUAL_{c}*(CLandIrAreaEquip_{c}/100)$

If LANDIRAREAACTUAL is still null, then set to 0.001.

Water withdrawal growth rates

Initialize water withdrawal growth rates (WaterWithdrawalSurfaceGR, WaterWithdrawalGroundGR, WaterWithdrawalFossilGroundGR) using the "getAnnualGrowthRate" function and the tables: SeriesWatWithdSurface, SeriesWatWithDGround, and SeriesWatWithDFossilGround.

Total and exploitable renewable resources

Initialize total renewable surface water resources (WatResTotalRenewSurface) using SeriesWaterResTotalRenewSurface. 

If null, set to 0.

Initialize total renewable groundwater resources (WatResTotalRenewGround) using SeriesWaterResTotalRenewGround.

If null, set to 0.

Initialize total renewable water resources (WatResTotalRenew) using SeriesWaterResTotalRenew.

If null set to 0.

Fill holes

If WatResTotalRenewGround is 0 but WatResTotalRenewSurface and WaterResTotalRenew do not equal 0, then:

$WatResTotalRenewGround_{c}=WaterResTotalRenew_{c}-WatResTotalRenewSurface_{c}$

If WatResTotalRenewSurface is 0, but WatResTotalRenewGround and WaterResTotalRenew do not equal 0, then:

$WatResTotalRenewSurface_{c}=WaterResTotalRenew_{c}-WatResTotalRenewGround_{c}$

If WaterResTotalRenew is 0, but WatResTotalRenewGround and WatResTotalRenewSurface do not equal 0, then:

$WaterResTotalRenew_{c}=WatResTotalRenewGround_{c}+WatResTotalRenewSurface_{c}$

If we still do not have any value for WaterResTotalRenew, then estimate using land area:

$WaterResTotalRenew_{c}=x*LANDAREA_{c}$

Subtract overlap between surface and groundwater out. Initialize overlap with SeriesWaterResOverlap.

$WatResTotalRenewSurface_{c}={\dfrac {WatResTotalRenewSurface_{c}}{WaterResTotalSurfaceGround_{c}}}*(WaterResTotalSurfaceGround_{c}-Overlap_{c})$

$WatResTotalRenewGround_{c}={\dfrac {WatResTotalRenewGround_{c}}{WaterResTotalSurfaceGround_{c}}}*(WaterResTotalSurfaceGround_{c}-Overlap_{c})$

If we have data for total renewable water resources (TRWR) but not TRWR surface and ground then we estimate based on the total using global averages. If we do not have data for exploitable surface and ground water resources we estimate using TRWR surface and ground resources.

If WatResTotalRenewGround is still 0 then: $WatResTotalRenewGround_{c}=0.29*WaterResTotalRenew_{c}$

If WatResTotalRenewSurface is still 0 then: $WatResTotalRenewSurface_{c}=0.71*WaterResTotalRenew_{c}$

If WatResExploitRenewGround is 0 then: $WatResExploitRenewGround_{c}=0.89*WatResTotalRenewGround_{c}$

If WatResExploitRenewSurface is 0 then: $WatResExploitRenewSurface_{c}=0.36*WatResTotalRenewSurface_{c}$

WatResExploitRenewSurface was initialized using SeriesWaterResExploitSurface and WatResExploitRenewGround was initialized using SeriesWaterResExploitGround.

If total exploitable is 0 then use sum of surface and ground: $WaterResTotalExploit_{c}=WatResExploitSurface_{c}+WatResExploitRenewGround_{c}$

If total renewable is still 0 then use sum of surface and ground: $WaterResTotalRenew_{c}=WatResTotalRenewSurface_{c}+WatResTotalRenewGround_{c}$